The HS-50-P is a 50 gallon pull type hydro seeding system for
off road use. It will seed 650 square feet per load. It is
equipped with a 6.5 H. P. Briggs Vanguard engine that
is directly coupled to a 2" x 2" high volume centrifugal pump.
The unit comes with 50' of 1 1/4" discharge hose, gun and 3
nozzles (1 wide hydro seeding nozzle, 1 straight distance nozzle
and 1 trim nozzle. The empty weight of the unit is 215 pounds.
The loaded weight is 615 pounds. the physical dimensions are
24" wide, 52" long, and 39" high. This unit can easily be
pulled by a compact tractor, ATV or utility vehicle.
The HS-50-P is ideal for a golf course for repairing wear
along cart paths, and for general repairs, for a school doing
some construction, for a cemetery, for construction repairs such
as someone installing irrigation systems or water lines, and for
lawn repair and renovation. It is capable of handling much
larger jobs, but if the average job is larger, a bigger machine
should be considered.
is applied at approximately 30 G.P.M. Time to spray a complete
tank is approximately 2 minutes. Mixing time is 2 to 5 minutes
depending on material. This unit comes with 50' of discharge
hose. the spray distance with the straight nozzle is
approximately 40'. The spray distance with an Area/volume kit
(2" cannon) is 60'
Typical materials used in one load would be 15 pounds of
hydro seeding mulch, the appropriate amount of seed for 650
square feet (any seed will work in hydroseeding), and the
appropriate fertilizer for 650 square feet (liquid, water
soluble or granular).
Like all TURBO TURF hydro seeding systems the HS-50-P comes
equipped with a long life poly tank that can never rust, the
ability to mix partial loads, a simple but powerful design with
few moving parts, continuous agitation, and the ability to
control the flow at the gun without making adjustments at the
unit. Prices quoted are for a complete machine ready to operate. Prices
are FOB the factory. Please call for a freight quote.