HYDRO SEEDING SYSTEM
First Modular Hydro Seeding System"
The HS-50-M is
the world's first modular Hydro Seeding System. It assembles
quickly from 3 parts, each light enough to be hand carried. The
modular system can be transported by passenger elevator, pack
mule, dog sled, loader bucket, by hand or in the trunk of a
car. If the challenge is seeding a penthouse apartment, and
enclosed courtyard or a mountain top, we have the solution.
The HS-50-M is
a 50 Gallon hydroseeding system. It will seed 650 square feet
per load. It is equipped with an 4 H. P. Honda engine that is
directly coupled to a 2" X 2" high volume centrifugal pump. The
unit comes with 35' of 1 1/4" discharge hose, a gun and three
nozzles ( 1 wide hydroseeding nozzle, 1 straight distance
nozzle, and 1 trim nozzle). The empty weight of the unit is 105
pounds. the loaded weight is 595 pounds.
Material is applied at approximately
30 G.P.M. Time to spray a complete tank is about 2 minutes.
Mixing time is 2-5 minutes depending on material. This unit
comes with 50' of discharge hose. It will easily handle an extra
50' of hose. The spray distance with the straight nozzle is
approximately 40'. The spray distance with an Area/Volume kit
(2" cannon) is 60'.
Typically materials used in one load
would be 15 pounds of hydro seeding mulch, the appropriate
amounts of seed for 650 square feet (any seed will work in
hydroseeding), and the appropriate fertilizer for 650 square
feet (liquid, water soluble, or granular).
Like all TURBO TURF systems, the
HS-50-M comes equipped with a long life poly tank that can never
rust, the ability to mix partial loads, a simple but powerful
design with few moving parts, continuous agitation, and the
ability to control the flow at the gun without making
adjustments at the unit. Prices quoted are a complete machine
ready to operate.
HS-50-M $ 1995.00
The shopping cart below is not functional at this time.
Please call the factory direct