| |
TURBO TURF
HS-300-E
HYDRO SEEDING SYSTEMS
The HS-300-E series combines great performance,
unmatched reliability and easy operation at a very affordable
price. This combination has let it become the most
popular hydro seeding unit in the world. Unlike
competitive units that say their (similar?) models are just
suitable for tacking and light mixes this is a high performance
hydro seeding unit that will mix a great slurry in minutes and
produce a sod quality lawn in a short time.
The HS-300-E series units have a powerful jet
agitation. They use two 2" jets mounted parallel to the
sides of the tank with a 333 GPM flow shooting out those jets
which creates a strong
rolling action that will mix a full load of materials in less
than a minute. All passages are large and have few
bends which almost totally eliminates the potential for clogs.
The pumps are on the HS-300-E and EH are 72 PSI, 333 GPM and
were designed specifically for hydro seeding. These
reliable pumps have more flow and pressure than competitive
units. They are directly coupled to the engine.
Excluding the engine, the only moving parts on the unit are the
impeller in the pump and ball valves. The two large 2"
mixing jets have over 6 times the mixing power of some competitive
units. Unlike some competitive units pressure going
to the gun can be regulated. This added control
allows easy and precise trimming when seeding close to houses,
walks and mulch beds. Turbo Turf systems outperform others
on the market and are the best system you can buy.
Seeding open areas is fast. Our newest
units are capable of seeding two more loads a day compared to
our older models and competitive units. Easier operation,
better trimming and faster seeding of open areas put Turbo
Turf's level of performance head and shoulders above the
competition. Operating a Turbo Turf is a one man
operation and so easy that a new operator can be seeding like a
pro in a very short time.
The HS-300E and HS-300-EH come have a
custom molded tank with a molded in bale tray to help minimize
material spilling as it is added to the unit. The
HS-300-E8 has an oval tank without the bale hopper.
All units have front fork slots for easy loading and unloading
from a trailer or truck. All units come ready to
operate with 100' of 1 1/4" I.D. hose mounted on hose holders on
the side of the tank and with three nozzles, (standard hydroseeding, trim and distance).
| Model # |
HS-300-E, HS-300-EH,
HS-300-E8 |
| Engines / Pumps |
HS-300-E 13 H.P. B&S recoil, 333 GPM 72
P.S.I. |
| |
HS-300-EH 13 H.P Honda electric start 333
GPM 72 PSI |
| |
HS-300-E8 8 H.P. B&S recoil, 333 GPM
45 PSI |
| Tank |
300 gallons capacity with molded in bale
hopper |
| Coverage per tank |
4000 sq. ft / 444 sq. yards / 372 sq. meters |
| Frame |
Structural steel 45" x 7'11" w/ fork
slots |
| Size overall |
62" wide, 7'11" long, 52" high |
| Weight |
700 pounds empty 2990 pounds loaded |
| Mixing jets |
two 2" jets |
| Mulch Capacity |
70 to 120 pounds depending on type |
| Recommended mulch types |
Paper / Jet Spray/ 50-50 / Envirotrol BFM |
| Recommended fertilizer types |
Liquid, water soluble, granular |
| Time to spray a load |
15 min +/- |
| Standard Hose |
100' of 1 1/4" kink resistant poly
reinforced |
| Standard Nozzles |
one wide flat spray, on trim, one straight |
| Max spray distance from gun |
70' |
| Maximum hose |
150-200' |
| Pull type available |
Yes |
The
HS-300-E is ideal for a landscaper doing residential and
commercial seeding with average jobs of 5,000 to 20,000 square
feet. It is capable of handling much larger jobs, When doing
larger jobs a seeding rate of up to 2 acres per day is possible
with a good water source. Material is applied at approximately
30 G.P.M. Time to spray a complete tank is 10 - 15 minutes.
Mixing time is 1-20 minutes depending on material.
It is also popular for golf courses with remodeling projects,
pipeline companies, schools, construction companies, parks
departments and anyone with areas to seed.
    
Click on these photos for a better view.
300 Gallon Skid type units.

HS-300-E8
$ 3,995.00
8 H.P. Honda recoil start, Oval tank

HS-300-E

HS-300-E $ 4,495.00
13 H.P. Briggs & Stratton recoil
start, tank with molded hopper

HS-300-EH

HS-300-EH $ 4,795.00
13 H.P. Honda with Electric Start tank
with molded hopper

Pull Type Hydro Seeding
units
HS-300-E8P (8 H.P) $
6795.00

HS-300-EP (13 H.P.
B & S) 7295.00


HS-300-EHP (13 H.P.
Honda) 7595.00


 |
Product
Name 300 Gallon Hydro
Seeding unit
Product information
Item #: HS-300-E
|
|
|