| |
TURBO TURF
HS-150
HYDRO SEEDING SYSTEM
Unit pictured above is equipped with the optional "Seed & Spray"
The HS-150, is a 150 Gallon, skid type hydroseeding system.
It will seed 2000 square feet per load. It is equipped with an
6.5 H.P. Briggs & Stratton engine (a 5.5 H. P. Honda engine is
available for an additional charge of $ 100.00 ) that is
directly coupled to a 2" X 2" high volume centrifugal pump. The
unit comes with 100' of 1 1/4" discharge hose, a gun and three
nozzles (1 wide hydroseeding nozzle, 1 straight distance nozzle,
and 1 trim nozzle). The empty weight of the unit is 330 pounds.
the loaded weight is 1530 pounds. the physical dimensions are
41"W x 60"L x 44"H. The size of the skid is 26" x 72". This
unit can easily be transported in the pack of a pick up truck or
on a trailer.
The HS-150 is ideal for a golf course for repairing wear
along cart paths, and for repair projects, for a cemetery, for a
school, for construction repairs such as someone installing
irrigation systems or water lines, for installing a new lawn in
areas with smaller lawns and for lawn repair and renovation . It
is capable of handling much larger jobs, but if the average job
is larger, a bigger machine should be considered. Material is
applied at approximately 30 G.P.M. Time to spray a complete tank
is about 4-5 minutes. Mixing time is 2-5 minutes depending on
material. This unit comes with 100' of discharge hose. It will
handle an extra 50' of hose. The spray distance with the
straight nozzle is approximately 40'. The spray distance with an
Area/Volume kit (2" cannon) is 60'.
Typically materials used in one load would be 3/4 - 1 bale of
hydro seeding mulch, the appropriate amount of seed for 2000 sq.
ft. (any seed will work in hydroseeding), and the appropriate
fertilizer for 2000 square feet (liquid, water soluble, or
granular).
Like all TURBO TURF systems the HS-150 comes equipped with a
long life poly tank that can never rust, the ability to mix
partial loads, a simple but powerful design with few moving
parts, continuous agitation, and the ability to control the flow
at the gun without making adjustments at the unit. Prices quoted
are a complete machine ready to operate. Pull type units are
intended for off road use.
HS-150 $
2795.00
The shopping cart below is not functional at this time.
Please call the factory direct to order
|
|
Product
Name 150 Gallon Hydro Seeding System
Product information
Item #: HS-150
|
|
|
04/15/2006 
