TURBO TURF
HS-150-P
HYDRO SEEDING SYSTEM
SHOWN WITH OPTIONAL TURF
CHEMICAL SPRAY BOOM
The HS-150-P, is a 150 Gallon, pull type hydroseeding system. It has a clevis
hitch (pin hitch) and two 20 x 10.0 x 8 tires on demountable hubs. It will seed
2000 square feet per load. It is equipped with an 6.5 H. P. Briggs & Stratton
Intek engine (a 5.5 H.P. Honda engine is available as an option for an
additional $ 100.00) that is directly
coupled to a 2" X 2" high volume centrifugal pump. The unit comes with
100' of 1 1/4" discharge hose, A gun and three nozzles (1 wide hydroseeding
nozzle, 1 straight distance nozzle, and 1 trim nozzle). The empty weight of the
unit is 380 pounds. the loaded weight is 1580 pounds. the physical dimensions
are 41"W x 84"L x 52"H. This unit is easily pulled by a compact
tractor, ATV or a utility vehicle such as the John Deere Gator.
 The HS-150-P is ideal for a golf course for repairing wear along cart paths,
and for repair projects, for a cemetery, for a school, for construction repairs
such as someone installing irrigation systems or water lines, for installing a
new lawn in areas with smaller lawns and for lawn repair and renovation . It is
capable of handling much larger jobs, but if the average job is larger, a bigger
machine should be considered. Material is applied at approximately 30 G.P.M.
Time to spray a complete tank is about 4-5 minutes. Mixing time is 2-5 minutes
depending on material. This unit comes with 100' of discharge hose. It will
handle an extra 50' of hose. The spray distance with the straight nozzle is
approximately 40'. The spray distance with an Area/Volume kit (2" cannon)
is 60'.
Typically materials used in one load would be 3/4 - 1 bale of hydro seeding
mulch, the appropriate amount of seed for 2000 sq. ft. (any seed will work in
hydroseeding), and the appropriate fertilizer for 2000 square feet (liquid,
water soluble, or granular).
 Like all TURBO TURF systems the HS-150-P comes equipped with a long life poly
tank that can never rust, the ability to mix partial loads, a simple but
powerful design with few moving parts, continuous agitation, and the ability to
control the flow at the gun without making adjustments at the unit. Prices
quoted are a complete machine ready to operate. Pull type units are intended for
off road use.
HS-150-P
$ 3095.00
The shopping cart in this page is not functional at this
time. Please call the factory direct to order
 |
Product
Name 150 Gallon Pull Type Hydroseeding System
Product information
Item #: HS-150-P
|
|
04/15/2006 
