HYDRO SEEDING SYSTEMS
The HS-1000-XPW, is a 1000 Gallon, skid type hydroseeding
system. It will seed 1/3rd acre per load. It is equipped with an
18 H. P. Kohler Command engine that is directly coupled to a 4" X
4", 640 G. P. M., 63 P.S.I. high volume centrifugal pump. The unit comes
with 100' of 1 1/4" discharge hose, gun and 3 nozzles ( 1 wide,
1 medium and 1 straight nozzle). The jet "Bale
Buster" is standard on this unit. The empty weight of the unit
is 1250 pounds. the loaded weight is 9250 pounds. the physical
dimensions are 82"W x 118"L x 78"H. The size of the skid frame
on this unit is 57"W x 115"L. This unit can be mounted on the
back of a truck with sufficient load capacity or it can also be
easily operated from a trailer.
The HS-1000-XPW is ideal for a landscaper doing residential
and commercial seeding with average jobs of more than 13,000
square feet. On large jobs 3 to 6 acres can be seeded per day
with a good water source. It is capable of handling much smaller
jobs, but if the average job is larger, a bigger machine should
be considered. Material is applied at approximately 40 G.P.M.
Time to spray a complete tank is about 13 minutes. Mixing time
is 1-20 minutes depending on material. This unit comes with 100'
of discharge hose. It will easily handle an extra 100' of hose.
The spray distance with the straight nozzle is approximately
55'. The spray distance with an Area/Volume kit (2" cannon) is
The HS-1000-XPW features dual 2" I.D. jets
equipped with a quick coupler for easy service in the unlikely
event of a problem, a quick disconnect for the discharge hose, a
jet bale buster that will pulverize hydroseeding mulch in
seconds and a bale tray for easy loading.
Typically materials used in one load would be 5 to 6 bales of
hydro seeding mulch, the appropriate amount of seed for 13,000
sq. ft. (any seed will work in hydroseeding), and the
appropriate fertilizer for 13,000 square feet (liquid, water
soluble, or granular).
Like all TURBO TURF systems the HS-1000-XPW, comes equipped
with a long life poly tank that can never rust, the ability to
mix partial loads, a simple but powerful design with few moving
parts, continuous agitation, and the ability to control the flow
at the gun without making adjustments at the unit. Prices quoted
are a complete machine ready to operate. Trailers shown in the
photo's are optional.
HS-1000-XPW (Skid Unit)
HS-1000-XPW-P (Pull Unit) $ 16,095.00