HS-100

HYDRO SEEDING SYSTEM

The HS-100, is a 100 Gallon, skid type hydroseeding system. It will seed 1300 square feet per load. It is equipped with an 4 H. P. Honda engine that is directly coupled to a 2" X 2" high volume centrifugal pump. The unit comes with 100' of 1 1/4" discharge hose, gun and three nozzles ( 1 wide hydroseeding nozzle, 1 straight distance nozzle, and 1 trim nozzle). The empty weight of the unit is 210 pounds. the loaded weight is 1010 pounds. the physical dimensions are 27"W x 56"L x 33"H. The size of the skid frame on this unit is 20"W x 56"L. This unit will fit in the back of a compact pickup, or a utility vehicle such as the John Deere Gator. It can also be easily operated from a trailer.

The HS-100 is ideal for installing a new lawn in areas with smaller lawns and for lawn repair and renovation, for a golf course to use in repairing wear along cart paths and for repair projects, for a cemetery, for construction repairs, for someone installing irrigation systems or water lines, It is capable of handling much larger jobs, but if the average job is larger, a bigger machine should be considered. Material is applied at approximately 30 G.P.M. Time to spray a complete tank is about 3-4 minutes. Mixing time is 2-5 minutes depending on material. This unit comes with 100' of discharge hose. It will handle an extra 50' of hose. The spray distance with the straight nozzle is approximately 40'. The spray distance with an Area/Volume kit (2" cannon) is 60'.

Typically materials used in one load would be a half bale of hydro seeding mulch, the appropriate amount of seed for 1300 sq. ft. (any seed will work in hydroseeding), and the appropriate fertilizer for 1300 square feet (liquid, water soluble, or granular).

Like all TURBO TURF systems the HS-100 comes equipped with a long life poly tank that can never rust, the ability to mix partial loads, a simple but powerful design with few moving parts, continuous agitation, and the ability to control the flow at the gun without making adjustments at the unit. Prices quoted are a complete machine ready to operate. Trailers shown in the photo's are optional.