The new Turbo Turf HM-500-T
is an ideal machine for those who need to spray difficult
materials and heavy slurries. The HM-500-T will play
with even the most difficult materials and make the hardest
job a snap. The aggressive paddle agitation allows you to
load full bales without the need to break them up. The
positive displacement Bowie gear pump allows you to spray
thick slurries of any
hydro seeding or
control mulch through up to 500 feet of hose.
Never worry about rust again. Turbo Turf’s poly tank can
never rust and comes with a 20 year pro rated warranty.
While others scrape, sand and recoat their metal tank
units you can be doing more productive things. The
HM-500-T is designed so that the rugged poly tank serves
only as a carrier for the slurry. All moving parts are
supported by heavy
steel which has no contact with the fluids. Turbo
Turf’s mixing system is made to last and to have the
lowest maintenance requirements of any unit on the market.
WATCH OUR VIDEO
The Turbo Turf HM-500-T is the best value in the
industry with standard features like the front loading and
spraying platform, the ability to draw water from a pond
or stream (suction hose not included). These
add thousands of dollars to competitive units. The Turbo
Turf HM-500-T features the best performance and best value
in the industry.
Many in the industry saw the concept of a paddle
(mechanically agitated) hydro seeding system using a "PLASTIC"
tank as having great potential. Early attempts by others
involved hanging a bearing on the plastic tank and this approach
did not work well. Turbo Turf took a whole new approach.
The bearings and agitator shaft are supported completely by
heavy structural steel supports and the tank is used for nothing
but holding the material. There is no stress whatsoever on
the tank and the entire mixing system would run without the tank
even being present. This system has now been on the
market for several years without a single failure. The
system is so reliable that Turbo Turf has introduced a 20 year
pro rated tank warranty on mechanical units such as the HM-500-T.
The HM-500-T will seed 6600 square feet per load. It is
equipped with an 13 H. P. Honda electric start engine that also
drives the 2" Bowie Postive Displacement Gear PUmp The platform and tower gun are standard
Standard equipment includes 100' of 1 1/2" I.D. hose with free
flow couplings mounted on hose holders on the side of the
tank. Electric or manual rewind hose reels are available
as an option It also includes 3 nozzles (1 wide, 1 medium and
one straight nozzle) for the hose and one for the platform gun.
The HM-500-T has an empty weight of the unit is 1800 pounds. the
loaded weight is 5300 pounds. the physical dimensions are 58"W x
126"L x 83"H. The size of the skid frame is 45"W x
126"L. It will seed an area of 6600 sq. ft. per
load. Maximum materials are 200 pounds of 100%
wood mulch, 240 pounds of paper (cellulose) mulch or 300 pounds
of pelletized mulch. Time to spray a load from the
tower is about 7 minutes with a spray distance of up to 100'
Time to spray a load with the hose is about 10 minutes.
Any seed may be used and any fertilizer including granular,
water soluble or liquid.
Pull type $ 14,695.00
For more information
about the differences in Turbo Turf's mechanically agiated units